Furnace เตาเผาอุณหภูมิสูง
โพสต์เมื่อ : 26 ม.ค 2566 เวลา 7:34 น.
LABORATORY CHAMBER FURNACE - ELF The ELF laboratory
furnaces comprise 3 bench mounted models designed for light duty and general use up to 1100 °C.
These laboratory furnaces have a simple drop down door and a top mounted ceramic chimney. The
combination of low thermal mass insulation and free radiating wire elements embedded in the chamber sides provide efficient heating.
Standard Features:
- • 1100°C maximum operating temperature
• 6, 14 or 23 litre chamber volumes
• Drop down door with air gap to minimise external temperature
• Carbolite Gero 301 controller, with single ramp to set-point & process timer
• Delayed start / process timer function as standard
• Vacuum formed, low thermal mass insulation
• Hard ceramic hearth fitted as standard
• Ventilated via top mounted ceramic chimney
LABORATORY CHAMBER FURNACE – CWF
The CWF range of general purpose laboratory chamber furnaces is bench mounted. Models are available in five sizes with a maximum operating temperature up to 1300 °C.
The airflow in the CWF-B furnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the furnace.
The CWF-BAL furnace with integral balance can be used for thermogravimetric analysis (TGA) and loss on gnition (LOI) applications, where weight change of the sample must be monitored during the heating process. This is required, for example, in the determination of inorganic matter content in materials such as cement, lime, calcinated bauxite and refractories. For applications involving organic matter content, please refer to the AAF-BAL.
Standard Features:
The CWF range of general purpose laboratory chamber furnaces is bench mounted. Models are available in five sizes with a maximum operating temperature up to 1300 °C.
The airflow in the CWF-B furnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the furnace.
The CWF-BAL furnace with integral balance can be used for thermogravimetric analysis (TGA) and loss on gnition (LOI) applications, where weight change of the sample must be monitored during the heating process. This is required, for example, in the determination of inorganic matter content in materials such as cement, lime, calcinated bauxite and refractories. For applications involving organic matter content, please refer to the AAF-BAL.
Standard Features:
- • 1100°C, 1200°C or 1300°C maximum operating temperature
• 5, 13, 23, 36 or 65 litre chamber volumes
• Carbolite Gero 301 controller, with single ramp to set-point & process timer (CWF & CWF-B)
• 3216CC controller, with single ramp to set-point & process timer (CWF-BAL)
• Vertical lift door keeps heated surface away from the user
• Soft closing door on 5, 13, 21 & 23 litre models
• Delayed start / process timer function as standard
• Hard wearing alumina element carrier, furnace entrance and hearth • Energy efficient low thermal mass insulation
• Free radiating wire wound elements for optimum uniformity
• Easy access to elements & controls simplifies maintenance & servicing
• CWF-B: Enhanced airflow from tall chimney & door vents for full combustion
• CWF-BAL: With integrated balance that runs independently of the furnace control system